Glass anti mold isolation powder cleaning agent
Application field: Widely used in various optical glass, white glass, tempered glass, etc.
Product Introduction
Glass anti mold isolation powder cleaning agent is an acidic glass soaking cleaning agent that has strong dispersion, peeling, and complexation properties against polishing powder, anti mold powder, dust, and metal particle dirt. It is suitable for cleaning various particle dirt on the glass surface, especially polishing powder that is difficult to remove after flat grinding and polishing. It can be used as a pre soaking cleaning agent, combined with other alkaline cleaning agents, to completely remove polishing powder residue.
Application field: Widely used in various optical glass, white glass, tempered glass, etc.
Product Feature
| √ Especially effective for cerium oxide polishing powder, with high cleanliness |
| √ No scratches, watermarks, or white spots after cleaning |
| √ The tank liquid has a long service life and will not return to dirt or dirt |
| √ Protect the glass from discoloration, dullness, and damage to the film layer |
| √ Water based safety, low foam type, easy to rinse, no residue |
| √ Meets VOC, COD, and EU RoHS requirements |
Quick to clean, non corrosive, easy to rinse, environmentally friendly, odorless, and not harmful to hands
Physical and chemical indicators
| Appearance | Colorless to slightly yellow liquid | Density | 1.04～1.06g/L |
| PH | 3-5 or 6-9 or 11-13(working fluid) | Secure | Non combustible non corrosive |
| Environmental protection | Phosphorus free, halogen-free, compliant with EU RoHS requirements | ||
Process Flow
Precautions for use
USAGE
Constant temperature immersion cleaning or ultrasonic cleaning
USAGE METHOD
Dilute in proportion to the working solution, heat to 50-60 degrees, soak at a constant temperature for 5-10 minutes, or clean with ultrasound for 2-3 minutes.For heavy oil contaminated workpieces, extend the cleaning time or use multiple grooves to thoroughly clean them.
MAINTENANCE
1. Regularly check the temperature and liquid level of the tank liquid, replenish water in a timely manner, and add the corresponding proportion of the original liquid.
2. Regularly replace the tank liquid according to the specified time.